[1] Lu J J. Theoretical optimization and experiment on lubrication of floating microgroove cylindrical seal.Industrial Lubrication and Tribology(2020)72(10): 1217-1226

[2] Lu J J, Ding X X, Zhang W. The influence of spiral angle on lift-off speed of face gas seal under start-up.Sn Applied Sciences(2019)1(9): 1-12

[3] Lu J J, Wang T R, Ding X X, Song H, Li H. Tribological Performance of Friction Pairs with Different Materials and Bi-Composite Surface Texture Configurations.Applied Sciences-Basel(2021)11(11): 4738

[4] Wang X L, Liu M H. The Seal Performance of Compliant Foil Gas Seal Based on Multi-Scale Analysis.Processes(2022)10(6): 1123

[5] Wang X, Liu M, Hu X, Sun J. The Influence of T groove layout on the performance characteristic of cylinder gas seal.(2018): 701-707

[6] Wang X L, Liu M H, Kao-Walter S, Hu X P. Numerical Evaluation of Rotordynamic Coefficients for Compliant Foil Gas Seal.Applied Sciences-Basel(2020)10(11): 3828

[7] Liu Y, Zhang K, Han J-H, Hwang Y-H, Xu S, Kim D-E. One-step method to enhance biotribological properties and biocompatibility of DLC coating by ion beam irradiation.Friction(2022)10(7): 1114

[8] Liu Y, Han J-H, Wang T, Hwang Y-H, Xu S, Liu W, Kim D-E. Tribochemical reaction and wear mechanism of MoDTC based friction modifier.Tribology International(2022)165:

[9] Liu Y, Shin D G, Xu S, Kim C-L, Kim D-E. Understanding of the lubrication mechanism of reduced graphene oxide coating via dual in-situ monitoring of the chemical and topographic structural evolution.Carbon(2021)173: 941-952

[10]陆俊杰,张炜,谢方民,焦永峰.一种自适应柱状密封气膜特性分析.化工学报(2020)71(S1): 346-354

[11]陆俊杰,张炜,马浩.基于FK滑移流模型的柱面微槽气浮密封浮升能力分析.化工学报(2021)72(8): 4267-4278

[12]王学良,刘美红,熊忠汾,李鑫.考虑表面粗糙度的柔性箔柱面气膜密封紊流特性分析.化工学报(2022)73(4): 1683-1694

[13]吉永林,许佩华,史正,吕瑞玲,刘东红,周建伟.低温酸奶灌装设备杀菌技术.包装工程工程版(2022)42(19): 166-170

[14]刘立君,冯梦奎,王晓陆,崔元彪,贾志欣,李继强.超声辅助H13模具钢表面激光熔覆强化层组织分析.焊接学报(2022)42(6): 85-90

[15] Wang X, Wright E, Liu Z, Gao N, Li Y. Development of a novel artificial neural network model for closed pulsating heat pipe with water and aqueous solutions.AsiaPacific Journal of Chemical Engineering(2022)17(1): e2719

[16] Tang J J, Liang C, Xu C G. First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy.Materials Science Forum(2022)1053: 71-76

[17] Tang J J, Liang C, Xu C G. Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove.Materials Science Forum(2022)1053: 205-211

[18] Shahzad M K, Ding Y, Xuan Y, Gao N, Chen G. Modelling and performance analysis of a single stage open absorption heat pump system in aspen plus using aqueous LiBr and HCOOK: A waste moist heat recovery application.Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy(2022)236(3): 538-554

[19] Hao X Y, Gao N, Chen G M, Volovyk O, Wang X H, Xuan Y M. Experimental Investigation of the Ejector Refrigeration Cycle for Cascade System Application.Journal of Thermal Science(2022)31(5): 1476-1486

[20] Zhang S, Zeng J, Wang C, Feng L, Song Z, Zhao W, Wang Q, Liu C. The Application of Wearable Glucose Sensors in Point-of-Care Testing.Front Bioeng Biotechnol(2021)9: 774210

[21] Zhang C, Liu W, Huang L R, Wang C G, Huang H R, Lin L, Wang P C. Process analysis of biconvex tube hydroforming based on loading path optimization by response surface method.Int J Adv Manuf Tech(2021)112(9-10): 2609-2622

[22] Zhan X H, Qi C Q, Wu M Y, Liu L J, Gao Z N. Laser cladding of FeCoCrNi high-entropy alloy on Ti-6Al-4V alloy: Microstructure, phase transformation and bonding region.Modern Physics Letters B(2021)35(1): 2150037

[23] Xuan Y M, Duan B S, Fang K L, Ding Y Q, Gao N, Chen G M. Vapor Pressure Measurement of Ternary Systems LiCl plus [Emim]l + H2O and LiCl plus [Dmim]I + H2O.Journal of Chemical and Engineering Data(2021)66(8): 3346-3353

[24] Wu M, Zhan X, Bu H, Liu L, Song Y, Li Y. Wear resistance of different bionic structure manufactured by laser cladding on Ti6Al4V.Metals and Materials International(2021)27(7): 2319-2327

[25] Wang X, Yan Y, Wright E, Hao X, Gao N. Prospect evaluation of low-GWP refrigerants R1233zd (E) and R1336mzz (Z) used in solar-driven ejector-vapor compression hybrid refrigeration system.Journal of Thermal Science(2021)30(5): 1572-1580

[26] Wang Q, Qi P P, Li S P. A Concurrence Optimization Model for Low-Carbon Product Family Design and the Procurement Plan of Components under Uncertainty.Sustainability(2021)13(19): 10764

[27] Tang J J, Liang C, Xu C G. High Throughput Calculation and Screening of High Strength and High Conductivity Cu-Cr-Sn Copper Alloy.Key Engineering Materials(2021)907: 244-249

[28] Tang J J, Liang C, Xu C G. High Throughput Calculation and Characteristic Structure Selection of Cu-Cr-Sn Copper Alloy Based on Matclould Platform.Key Engineering Materials(2021)907: 250-257

[29] Song R Y, Wu Y Q, Lin Z A, Ren C J, Fang S. Study on the influence of blade profile on hydraulic Savonius turbine under wave action.Ocean Engineering(2021)240: 109863

[30] Song R Y, Ren C J, Ma X, Qiu L Y, Lin Z. The study on the anti-impact performance of the oscillating buoy with various air cushions.Iet Renewable Power Generation(2021)15(14): 3459-3471

[31] Shahzad M K, Ding Y Q, Xuan Y M, Gao N, Chen G M. Energy efficiency analysis of a multifunctional hybrid open absorption system for dehumidification, heating, and cooling: An industrial waste heat recovery application.Energy Conversion and Management(2021)243: 114356

[32] Liu S, Xu M, Pang C, Lester E, Wu T. Theoretical insights of catalytic oxidation of Hg0 on g-C3N4-supported Fe/Co/Ni-based bi-metallic catalysts using O2 in coal-fired flue gas as the oxidant.Fuel(2021)306: 121593

[33] Liu S, Xu M, Chen Y, Yu J, Pang C, Wu T. DFT simulation-based screening of single transition metals supported on g-C3N4 for the catalytic oxidation of Hg0.Fuel(2021)305: 121456

[34] Lei Z, Pei L. Cutting mechanism of straight-tooth milling process of titanium alloy TC21 based on simulation and experiment.PLoS One(2021)16(10): e0258403

[35] Ding Y, Gao N, Li N, Chen G, Xuan Y. Experimental and modelling of vapour–liquid equilibria of ternary systems {HCOOK+[Emim] Ac+ H2O},{HCOOK+[Emim] Br+ H2O},{HCOOK+[Emim] Cl+ H2O}, and {HCOOK+[Emim] NO3+ H2O}.The Journal of Chemical Thermodynamics(2021)161: 106503

[36] Chen J Y, Gao X X, Shao S Q, Hu H T, Xie J L, Li N, Gao N. Numerical investigation of the vortex tube performance in novel precooling methods in the hydrogen fueling station.International Journal of Hydrogen Energy(2021)46(7): 5548-5555

[37]贾志欣,王子平,李继强,刘立君,霍庆文.基于CAE分析的复杂壳体压铸模具设计.铸造(2020)69(8): 873-877

[38]王少峰,河彭,贾志欣. SMC模压模具抽真空结构设计.模具制造(2020)10:


[40]彭河,王少峰,贾志欣.汽车尾门模压模具设计.模具工业(2020)46(8): 39-42


[42]周建伟,孟倩,高德,刘东红,丁甜.超声加工技术对牛肉及其制品品质影响的研究进展.现代食品科技(2020)36(1): 296-302

[43]吴映江,宋瑞银,郑堤,吴烨卿,陈炫光. Savonius型桨叶水动力特性研究.海洋工程(2020):


[45]吴勇平,邹铭轩,熊城炜,倪钱盈,徐巧宁,刘毅.大功率推板式波浪生成实验系统的建模分析.实验室研究与探索(2020)39(6): 12-15

[46]刘立君,王晓陆,沈秀强,宋袁曾.耐热钢表面激光熔覆陶瓷工艺.Journal of Harbin University of Science & Technology(2020)25(1):

[47]刘立君,刘大宇,王晓陆,李继强,崔元彪,贾志欣. H13钢激光熔覆陶瓷修复层的参数优化.焊接学报(2020)41(7): 65-70

[48]刘立君,刘大宇,崔元彪,贾志欣,李继强.模具磨损表面激光熔覆修复层的数值模拟技术.电焊机(2020)50(7): 46-52

[49]刘东红,周建伟,吕瑞玲,马晓彬,王文骏,唐君钰.食品智能制造技术研究进展.食品与生物技术学报(2020)39(7): 1-6

[50] Zhou B, Liu L J, Chen G Y. Contact analysis for dual peg-in-hole assembly of automobile alternator frame.Mechanics & Industry(2020)21(2): 209

[51] Zhang T, Huang H B, Li W, Chang X D, Cao J, Hua L C. Vulcanization Modeling and Mechanism for Improved Tribological Performance of Styrene-Butadiene Rubber at the Atomic Scale.Tribology Letters(2020)68(3): 1-11

[52] Xiao M, Zuan L, Song R. Local path planning for unmanned surface vehicle with improved artificial potential field method.2020 3nd International Seminar on Computer Information Science and Application Technology(2020)1634: 012125

[53] Wang X H, Li Y, Yan Y Y, Wright E, Gao N, Chen G M. Prediction on the viscosity and thermal conductivity of hfc/hfo refrigerants with artificial neural network models.International Journal of Refrigeration(2020)119: 316-325

[54] Wang X, Wright E, Gao N, Li Y. Evaluation on Excess Entropy Scaling Method Predicting Thermal Transport Properties of Liquid HFC/HFO Refrigerants.Journal of Thermal Science(2020)31(5): 1465-1475

[55] Liu Y, Zheng Y X, Song R Y, Chen J H, Jin H. Wave generation characteristic analysis of piston and flap type wave maker with rotary-valve-control vibrator.Journal of Vibration and Control(2020)26(15-16): 1297-1308

[56] Liu Y, Zheng J F, Song R Y, Xu Q N, Chen J H, Huang F P. Simple Push-Type Wave Generating Method Using Digital Rotary Valve Control.Chinese Journal of Mechanical Engineering(2020)33(1): 1-11

[57] Jin H, Song R Y, Liu Y. Sloshing Motion in a Real-Scale Water Storage Tank under Nonlinear Ground Motion.Water(2020)12(8): 2098

[58] Jin H, Liu Y, Song R Y, Liu Y. Analytical Study on the Effect of a Horizontal Perforated Plate on Sloshing Motion in a Rectangular Tank.Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme(2020)142(4):

[59] Ding Y, Gao N, Wu Y, Xuan Y, Chen G. Vapor-Pressure Measurement of Ternary System CaCl2+[Emim] Br+ H2O, CaCl2+[Emim] Cl+ H2O, CaCl2+[Emim] Ac+ H2O, and CaCl2+[Emim] NO3+ H2O.Journal of Chemical & Engineering Data(2020)66(1): 692-701

[60] Chen G, Cui X, Wu Y, Li W, Wu F. Microstructural, compositional and hardness evolutions of 96.5 Sn–3Ag–0.5 Cu/TiC composite solder under thermo-migration stressing.Journal of Materials Science: Materials in Electronics(2020)31(12): 9492-9503

[61] Chen G, Cui X, Wu Y, Li W, Wu F. Performance of 96.5 Sn–3Ag–0.5 Cu/fullerene composite solder under isothermal ageing and high-current stressing.Soldering & Surface Mount Technology(2020)33(1): 35-46


[63]王永川,李建新,余维高,徐美娟,高夫燕.褐藻与石油焦共气化特性及贝壳催化效果.太阳能学报(2019)40(5): 1359

[64]张钊,高夫燕,李建新.石油焦焦质特性对水焦浆稳定性影响的实验研究.热能动力工程(2019)34(8): 163


[66]宋袁曾,刘立君,武梦瑶,李亚萍.仿生条纹制备顺序对襟翼滑轨表面WC/TC4熔覆仿生耐磨层的残余应力与变形影响的模拟分析.焊接(2019)(4): 23-28

[67]宋瑞银,吴映江,陈凯翔.双体船式波浪能发电系统实验测试研究.太阳能学报(2019)40(8): 2236-2243

[68]史俊勤,孙琨,方亮,许少锋.含水条件下单晶Cu的应力松弛及弹性恢复.金属学报(2019)55(8): 1034-1040

[69]刘东红,徐恩波,邹明明,侯福荣,陈卫军,周建伟.复杂食品体系及食品加工过程的模型与分析:现状及进展.中国食品学报(2019)19(10): 1-10

[70] Zhao Z, Dong Z W, Wu H B. Effect of particle size on the ultraprecision polishing process of titanium alloy Ti6Al4V.P I Mech Eng C-J Mec(2019)233(13): 4490-4496

[71] Xuan Y M, Ding X Y, Gao N, Ding Y Q, Meng X, Chen G M. Vapor Pressure Measurement of Ternary Systems LiCl plus [Emim]Cl + H2O, LiBr + [Emim]Cl + H2O, and LiCl plus [Emim]Br + H2O.Journal of Chemical and Engineering Data(2019)64(6): 2406-2413

[72] Xu S F, Wang Q J, Wang J G. A new wall model for slip boundary conditions in dissipative particle dynamics.International Journal for Numerical Methods in Fluids(2019)90(9): 442-455

[73] Qi C Q, Zhan X H, Gao Q Y, Liu L J, Son Y Z, Li Y P. The influence of the pre-placed powder layers on the morphology, microscopic characteristics and microhardness of Ti-6Al-4V/WC MMC coatings during laser cladding.Optics and Laser Technology(2019)119: 105572

[74] Pei L, Wu H B. Effect of ultrasonic vibration on ultra-precision diamond turning of Ti6Al4V.Int J Adv Manuf Tech(2019)103(1-4): 433-440

[75] Pei L, Liu C, Shu X D. Study on Formation Mechanism of Axle Part in the New Cross-Wedge Rolling Process Based on Experiment and Simulation.Transactions of the Indian Institute of Metals(2019)72(12): 3305-3312

[76] Liu Y Z, Gao M Y, Xu S S, Kim D E. Study on Electroconductive Tribological Properties of Ag-Based Composite Coating.International Journal of Precision Engineering and Manufacturing(2019)20(8): 1405-1413

[77] Li W, He S, Li S. Experimental Study and Thermodynamic Analysis of Hydrogen Production through a Two-Step Chemical Regenerative Coal Gasification.Applied Sciences-Basel(2019)9(15): 3035

[78] Gao N, Wang X H, Xuan Y M, Chen G M. An artificial neural network for the residual isobaric heat capacity of liquid HFC and HFO refrigerants.International Journal of Refrigeration-Revue Internationale Du Froid(2019)98: 381-387

[79] Gao F Y, Wang Y C, Li J X, Xu M J. Preparation and properties of oil-substituted fuel based on petroleum coke with biomass fermentation.Petroleum Science and Technology(2019)37(19): 2094-2099