主讲公差与技术测量

[1]2022.1-2024-06，锡青铜阀体铸锻一体化智能成形技术研发及产业化，2022年宁波市第一批重大科技攻关暨“揭榜挂帅”项目，2021Z108，3/24。

[2]2021.10-2023-09，多功能集成感知电子皮肤的研发与应用，2021年宁波市第一批重大科技攻关暨“揭榜挂帅”项目，2021Z108，参与。

[3]2020.12-2021.12，基于ISIGHT优化集成系统的真空发生器结构设计，星宇电子(宁波)有限公司，主持。

[4]2020.01-2021.12，精密汽车电动尾门驱动单元减速器的超轻量化、高强度技术研究，宁波双林汽车部件股份有限公司，宁波市科技创新2025重大专项（202002P2004），参与。

[5]2020.01-2022.12，浙江省基础公益研究计划项目，LGG20E050004，基于半固态流变介质的大高径比T型管内高压成形工艺研究,浙江省科学技术厅,参与。

[6]2020.07-2022.12，新能源汽车驱动电机铁芯模内高速精准胶接关键技术开发，宁波市科技创新2025重大专项，主持。

[7]2019.07-2020.12，基于DCS系统的工业过程控制系统开发，宁波尼可海绵科技有限公司，主持。

[8]2019.07-2020.07，管接型真空发生器结构优化设计，宁波英特灵气动科技有限公司，主持。

[9]2019.10-2020.12，一种填充式的法兰自动整理装置技术开发，宁波市沃瑞斯机械科技有限公司，10万，主持。

[10]2019.10-2020.12，低噪音陶瓷阀芯及模具开发，宁波万海阀门科技有限公司，主持。

[1]HuangXueying,ZhaoJun,YuGaochao,LiRongzhi,MaBangbang,WangChunge*.Analysis of three‑roller continuous and synchronous calibration process of straightness and ovality for large thin‑walled pipes considering the weld[J]. The International Journal of Advanced Manufacturing Technology, 2022.

[2]HuangXueying,YuGaochao,WangChunge,ZhaoJun.Deformation mechanism analysis of three‑roller continuous and synchronous calibration process of straightness and roundness for LSAW pipes[J]. The International Journal of Advanced Manufacturing Technology, 2022, 121(3):1731-1742.

[3]Zhang Sheng^1†, Zeng Junyan^1†,Wang Chunge^1†, et al. The Application of Wearable Glucose Sensors in Point-of-Care Testing[J]. Frontiers in Bioengineering and Biotechnology, 2021, 9:774210.

[4]Zhang Chi, Liu Wen, Huang Lirong,WangChunge,Huang Haoran, Lin Li, Wang Peichao.Process analysis of biconvex tube hydroforming based on loading path optimization by response surface method[J]. The International Journal of Advanced Manufacturing Technology, 2021, 112(9):2609-2622.

[5]Wang Haoran,Wang Chunge, Li Muyu, et al. Constitutive Equations for Describing the Hot Compressed Behavior of TC4-DT Titanium Alloy[J]. Materials, 2020, 13(15):3424.

[6]Ma Rui,Wang Chunge*,Zhai Ruixue,Zhao Jun. An iterative compensation algorithm for springback control in plane deformation and its application, Chinese Journal of Mechanical Engineering,2019, 32(02):212-223

[7]Wang Chunge, Yu Gaochao, Wang Wei, Zhao Jun*.Deflection detection and curve fitting in three-roll continuous straightening process for LSAW pipes. Journal of Materials Processing Technology, 2018, 255:150-160.

[8]WangChunge, ZhangZhiyuan, ZhaiRuixue, YuGaochao, Zhao Jun*.Cross-sectional distortion of LSAW pipes in over-bend straightening process[J]. Thin-Walled Structures, 2018, 129: 85-93.

[9]Wang Chunge, Ma Rui, Zhao Juan, Zhao Jun*. Calculation method and experimental study of coulomb friction coefficient in sheet metal forming[J]. Journal of Manufacturing Processes, 2017, 27:126-137.

[10]马瑞,王春鸽*,赵军,翟瑞雪.平面变形回弹迭代补偿的收敛准则及应用研究[J].中国机械工程,2018,29(14):1696-1703.

[11]Yu Gaochao, Zhao Jun,Wang Chunge, Zhai Ruixue, Ma Rui.Development of a cold stamping process for forming single-welded elbows[J]. International Journal of Advanced Manufacturing Technology, 2016, 88(5-8):1-11.

[12]Wang Chunge, Yu GaochaoZhaoJun,Liu Wen.Pure-Bend and Over-BendStraightening Theory for In-PlaneCurved Beams with Symmetrical Section and Straightening Mechanism Analysis. Metals 2022, 12, 1362.

[1]王春鸽,张池,郑浩民,刘文,林立,严翔,黄秀东,于雅雯.一种用于给新能源汽车驱动电机铁芯精准上胶的喷胶头, 2021-9-16,中国, 202111083634

[2]张池,王春鸽,王沛超,刘文,周茂伟,严翔,宁敬威,庄忠柱.用于给新能源汽车驱动电机铁芯精准上胶的定量喷胶装置, 2021-9-16,中国, 202111083615

[3]张晟,曾俊彦,钟海,夏庆超,王春鸽,汪倩倩,戴庭舸,一种感知性手术刀及其控制系统, 2021-7 -30,中国, 202121777095.X

[4]王春鸽,刘文.基于低熔点合金的半固态流变内高压集约式成形装置及方法,2019-6-21.发明专利, 201910080395.3.

[5]赵军,王春鸽,曹宏强,张春雨.大型板制单焊缝三通成形工艺方法及成形装置.发明专利, 201610530421.

[6]赵军,王春鸽,曹宏强.一种大型板制双焊缝三通的成形方法及成形装置.发明专利, 201610532021.

[7]赵军,王春鸽,翟瑞雪.一种大型直缝焊管三辊连续矫直装置及工艺方法.发明专利, 201610053710.X

[8]赵军,于高潮,王春鸽.单焊缝弯头压制成形方法.发明专利, 201410079806.4

无